Usable to 1800¢µ- Ideal for ¡°used¡± hot-top billet
casting tables Ready-to-apply, like ordinary paint primers by
brush or air-spray Clean, safe-to-use
This water-based,
clear light-syrup-appearing liquid is designed for sealing the surfaces of
porous ceramics and boards. It is desirable to clean off as much residual dust
and contamination as possible. Still, Z-PRIMERCOAT can be coated over these
materials to some extent. By merely painting or swabbing this material onto the
ceramic, the surfaces become much more amenable to topcoating with boron nitride
coatings such as Boron Nitride Lubricoat® and Boron Nitride
Lubricoat®-BlueTM which react with materials like Bone Ash
and red mud as well as some binders used in ceramic boards and the like .
Without Z-PRIMERCOAT, the acidic Boron Nitride coatings can lead to some degree
of spallation and/or mud-cracking that occurs either on drying or during
high-temperature use. By using the Z-PRIMERCOAT, these problems can be prevented
or reduced considerably.
For old [i.e., "used"] billet casting tables
that have Bone Ash or red mud dust layers, it is preferable to clean off as much
of the residual dust as possible. Then, apply the Z-Primercoat in the same
manner as a primer for a house paint. Dry as much as possible. Then, apply Boron
Nitride Lubricoat®-BlueTM by air-spraying until the table
is visibly blue all over. The Z-Primercoat seals in the Bone Ash or red mud
residuals and allows good adherence and performance of the topcoat of Boron
Nitride Lubricoat®-BlueTM. For new billet casting tables,
Z-PRIMERCOAT is normally not necessary, since the dust is not appreciable. In
such cases, just air-spray Boron Nitride Lubricoat®-BlueTM
until the color is uniformly blue.
ALLOWS OLD ["USED"]
CASTING TABLES TO BE BORON NITRIDE COATED SEALS THE SURFACE
POROSITY OF THE CERAMIC SEALS IN THE DUST AND
CONTAMINANTS ALLOWS READY TOPCOATING WITH ACIDIC BN
PAINTS |